nickel alloy inconel 600, 601/ 625/ 617 /X-750 /718 sheet

Basic Info

Model NO.	Inconel 625
Product Type	tube
Material	Ni
Carbon Content	Low Carbon
PCD	120mm
ET	0
Hole	0
standard	GB/ASTM/JIS/BIS/DIN
surface	bright
Sample	FRee
State	Soft 1/4hard 1/2hard hard T-hard
OEM	YES
MOQ	100kilograms
Transport Package	in Coil/Spool
Specification	0.1-100mm
Trademark	TANKII
Origin	Shanghai, China
HS Code	74082200
Production Capacity	2000 Tons/Year

Product Description

nickel alloy inconel 600, 601/ 625/ 617 /X-750 /718 sheet,

Description
Inconel 625, a nickel-chromium-molybdenum alloy contains 9% Moly, serves effectively as both a corrosion resistant and heat resistant material. The combination of high-temperature strength and resistance to halogen attack, oxidation, and carburization has made alloy 625 a popular choice for chemical and petrochemical process equipment exposed to hostile, hightemperature environments.
The high alloy content of Inconel 625 enables it to withstand a wide variety of corrosive environments. The alloy is almost completely resistant to mild environments such as the atmosphere, fresh water and seawater, neutral salts, and alkaline media. In more severe environments, the combination of nickel and chromium provides resistance to oxidizing chemicals, and the combination of nickel and molybdenum provides resistance to reducing conditions. The molybdenum content also makes Inconel 625 highly resistant to pitting and crevice corrosion. The columbium stabilizes the alloy against sensitization and prevents intergranular corrosion. The high nickel content provides freedom from chloride stress-corrosion cracking.
Inconel 625 made by NiWire is made into chemical processing equipment, aircraft engine and airframe components, ship and submarine parts.
Chemical Composition

Grade

Ni%

Cr%

Mo%

Nb+Ta%

Fe%

Al%

Ti%

C%

Mn%

Si%

Cu%

P%

S%

Inconel 625

Min 58

20-23

8-10

3.15-4.15

Max 5

Max 0.4

Max 0.4

Max 0.1

Max 0.5

Max 0.5

Max 0.5

Max 0.015

Max 0.015

Specifications

Grade	UNS	Werkstoff Nr.
Inconel 625	N06625	2.4856

Physical Properties

Grade	Density	Melting Point
Inconel 625	8.4 g/cm3	1290°C-1350 °C

Mechanical Properties

Condition	Tensile Strength	Yield Strength σp0.2/MPa	Elongation	Brinell Hardness
Annealing Treatment(Grade 1)	850 Mpa	450 Mpa	30%	≤220
Solution Treatment (Grade 2)	700 Mpa	300 Mpa	30%	≤200

Inconel 625 Grade 2 is recommended for components that require optimum resistance to creep or rupture. Fine-grained (annealed) material may be advantageous at temperatures up to 1500°F with respect to fatigue strength, hardness, and tensile and yield strength.
Our Production Standard

Standard	Bar	Forging	Pipe	Sheet/Strip	Fittings
ASTM	ASTM B446	ASTM B564	ASTM B444/B704/B705	ASTM B443	ASTM B366

Welding of Inconel 625
Any traditional welding procedures can be used to weld Inconel 625 to similar alloys or other metals, such as gas tungsten arc welding(GTAW), plasma arc welding (PAW), metal inertia gas welding (MIG) and so on. Before welding, remove scale, grease, mark and imprint. And no heat treatment needed before and after welding. Recommend filler wire regarding welding Inconel 625: ERNiCrMo-3
Size Range
Inconel 625 wire, bar, rod, forging, plate, sheet, tube, fastener, pipe fittings and other standard forms are available.